Company Registration
NGO Registration
Virtual business address
Startup Registration
Shop Act Registration
Annual Compliance
Income tax Filing
Trade License Registration
BIS Registration main
CDSCO Registration
Star Rating Certification
WPC Registration
Brand Registration
Legal Metrology Certification
PESO certification
Factory License Registration
Fire NOC
AERB Certification
PSARA License
Fssai License
RCMC Certification
Import Export Registration
China Food Export
RNI Certification
NSIC Registration
ISO Certification Main
US FDA
ICEGATE Registration Main
CPCB Approval
EIA Environment
CPCB/SPCB
E-Waste Management
Plastic Waste Management
Battery Waste Management
Sat, Aug 08 2026
Raju Karn
The Bureau of Indian Standards has introduced an important transition update for manufacturers and BIS licence holders dealing with self ballasted LED lamps for general lighting services. The revised IS 16102 (Part 1):2026, titled Self Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements, was introduced as the first revision of the earlier IS 16102 (Part 1):2012 standard. BIS issued implementation guidelines for the revised standard on 24 February 2026, setting out the transition requirements for existing licence holders and new applicants.
The original implementation timeline provided for a transition up to 2 August 2026. The latest reported update states that the implementation timeline has been extended to 2 February 2027, giving manufacturers additional time to complete testing, documentation and migration activities. This development is especially relevant for companies that already hold BIS certification under the earlier 2012 standard and need to transition their products to the revised 2026 requirements.
IS 16102 (Part 1):2026 is the revised Indian Standard covering safety requirements for self ballasted LED lamps used for general lighting services. The standard addresses various aspects of product safety and testing and has introduced updated requirements compared with the earlier version. BIS implementation information and the BIS laboratory system now show testing facilities and test scopes specifically covering IS 16102 (Part 1):2026.
The revised standard is important for manufacturers because compliance is not limited to the product design alone. Depending on the product and applicable requirements, manufacturers may need to review testing, marking, technical documentation and other aspects of their existing BIS certification. Companies with multiple models should therefore review their complete licence scope before starting the migration process.
BIS issued the implementation guidelines for IS 16102 (Part 1):2026 on 24 February 2026. The transition framework provided a period during which the existing 2012 standard and revised 2026 standard could be handled according to the conditions specified by BIS. The original implementation date was 2 August 2026.
The latest reported update states that the implementation timeline has been moved to 2 February 2027. Manufacturers should nevertheless check the latest BIS communication applicable to their specific licence before taking a final compliance decision because implementation dates and migration conditions can be revised through subsequent BIS communications.
The reported extension gives existing manufacturers additional time to move from the 2012 version to the revised 2026 standard. Under the implementation framework, existing licence holders need to establish conformity with the revised requirements through the applicable testing and documentation process. This is particularly important for manufacturers whose current BIS licence contains several models or series of LED lamps.
Manufacturers should not wait until the revised deadline approaches. Testing, technical assessment and BIS documentation can take time, particularly when a company has multiple products under one licence. The additional period should therefore be used to identify compliance gaps, arrange testing and complete the applicable migration or scope related activities.
The revised standard introduces several updated safety and testing requirements. The BIS laboratory system currently lists testing under IS 16102 (Part 1):2026 for areas including marking, abnormal operation, ingress protection, axial strength of Edison caps, fault conditions and other technical requirements.
Some important areas manufacturers should review include:
Updated Safety Requirements
The revised standard introduces updated safety provisions intended to address current LED lamp technology and product configurations.
Photobiological Safety
Testing related to photobiological safety is included within the revised testing framework, making this an important area for manufacturers to evaluate.
Abnormal Operation
Additional testing requirements apply to abnormal operating conditions.
Ingress Protection
The revised standard includes requirements relating to ingress protection for applicable products.
Marking Requirements
Manufacturers need to review product marking requirements and ensure that the applicable information is correctly provided.
Axial Strength of Edison Caps
Testing requirements relating to the axial strength of Edison caps are included in the revised standard.
Fault Condition Testing
Fault condition requirements have also been updated and should be considered during product assessment.
Rechargeable Battery Products
The revised requirements also address LED lamps incorporating non removable rechargeable batteries where applicable.
The exact testing requirements can vary according to the construction and features of the product, so manufacturers should assess their specific model rather than assuming that one testing approach applies to every LED lamp.
This update is important because a change in the applicable Indian Standard can affect an existing BIS licence, product testing, technical documents and product markings. Manufacturers that continue relying only on test reports prepared against the earlier standard may need to undertake additional testing or compliance activities before their products can continue under the revised requirements.
The extension provides valuable additional time, particularly for businesses with large product portfolios. It can also help manufacturers identify technical changes before submitting their migration documents. BIS's LIMS platform already shows multiple laboratories offering testing facilities for IS 16102 (Part 1):2026, which indicates that testing infrastructure for the revised standard is available.
Existing manufacturers should take the following steps during the transition period:
Review the Existing BIS Licence
Check the licence number, product scope, models, series and existing test reports.
Identify Applicable Models
Determine which models were covered under IS 16102 (Part 1):2012 and which models need to be evaluated against the 2026 version.
Compare Product Requirements
Review the product design, construction, marking and technical specifications against the revised standard.
Arrange Product Testing
Coordinate with the appropriate BIS recognised laboratory for the applicable tests under IS 16102 (Part 1):2026.
Prepare Technical Documents
Keep updated specifications, test reports, declarations, drawings and other supporting documents ready.
Complete BIS Migration
Submit the applicable documents and requests for migration, scope modification or other required action according to the latest BIS instructions.
Monitor BIS Updates
Keep checking official BIS communications because implementation conditions can change during a transition period.
Businesses entering the LED lamp market should carefully assess the latest applicable standard before applying for BIS certification. Since IS 16102 (Part 1):2026 is the revised version, manufacturers should understand its requirements before finalising product specifications and testing plans.
New manufacturers should ideally assess the product before manufacturing large quantities. Early assessment can help identify testing requirements, marking issues and design changes before the product enters the certification process.
The exact documentation depends on the applicable BIS scheme and product, but manufacturers may generally need documents such as:
Company and manufacturing unit details
Product technical specifications
Product drawings and construction details
Existing BIS licence documents, where applicable
Previous test reports
Test reports under IS 16102 (Part 1):2026
Quality control documents
Product photographs and marking details
Authorisation documents
Undertakings and declarations as required by BIS
Manufacturers should prepare documents according to the current BIS requirements rather than relying on an old checklist because documentation requirements can vary depending on the certification status and application type.
Transitioning a BIS licence to a revised Indian Standard can involve product assessment, laboratory testing, documentation and communication with BIS. A manufacturer may also need to understand whether the existing licence scope can be migrated directly or whether additional testing or scope modification is required.
PSR Compliance provides BIS certification and compliance consultancy for manufacturers, importers and businesses dealing with regulated products. Our services include BIS ISI certification, revised standard migration, testing coordination, documentation support, BIS application assistance, licence scope modification and query handling.
If your company already holds a BIS licence for self ballasted LED lamps or is planning to obtain certification under IS 16102 (Part 1):2026, our team can help you understand the applicable requirements and plan the certification process.
The transition from IS 16102 (Part 1):2012 to IS 16102 (Part 1):2026 is an important BIS compliance development for manufacturers of self ballasted LED lamps in India. BIS published the implementation guidelines for the revised standard on 24 February 2026, and the original transition timeline was set around 2 August 2026.
The latest reported update indicates that the implementation timeline has been extended to 2 February 2027, giving manufacturers additional time to complete testing, documentation and migration activities. Businesses should use this period carefully by reviewing their existing BIS licence, assessing product compliance, arranging applicable testing and preparing updated documentation.
Manufacturers should also remember that the extension does not mean that the revised standard can be ignored. The BIS laboratory system is already listing testing facilities for IS 16102 (Part 1):2026, including requirements relating to marking, abnormal operation, ingress protection and other safety parameters.
For the most accurate compliance decision, manufacturers should verify the latest BIS communication applicable to their particular licence and product before beginning the migration process.
IS 16102 (Part 1):2026 is the revised Indian Standard covering safety requirements for self ballasted LED lamps used for general lighting services. It replaces the earlier IS 16102 (Part 1):2012 standard.
The original transition deadline was 2 August 2026 under the BIS implementation guidelines issued in February 2026.
The latest reported update states that the implementation deadline has been extended to 2 February 2027. Manufacturers should verify the latest BIS communication applicable to their specific licence.
The 2012 standard is being phased out as manufacturers transition to IS 16102 (Part 1):2026. Businesses should follow the latest BIS instructions applicable to their product and certification status.
Manufacturers and BIS licence holders dealing with self ballasted LED lamps falling within the scope of the standard should assess their products and certification requirements under the revised standard.
The revised standard includes updated requirements relating to photobiological safety, abnormal operation, ingress protection, marking, rechargeable battery products, Edison cap strength and fault condition testing.
Existing licence holders covered under the earlier standard should review their licence and complete the applicable testing and migration requirements according to the latest BIS implementation instructions.
Testing may be required to establish conformity with the revised standard. The applicable tests depend on the product configuration and requirements of IS 16102 (Part 1):2026.
Yes. PSR Compliance can assist manufacturers with BIS certification, product assessment, testing coordination, documentation, licence migration and related compliance requirements.
Manufacturers should review their existing BIS licence, identify applicable models, assess the revised requirements, arrange testing where required and complete the applicable BIS migration or scope modification process before the applicable deadline.
Book your free consultation with our specialists today.
PSR Assistant